Nelze vybrat více než 25 témat Téma musí začínat písmenem nebo číslem, může obsahovat pomlčky („-“) a může být dlouhé až 35 znaků.

init.cpp 64KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397
  1. // Copyright (c) 2009-2010 Satoshi Nakamoto
  2. // Copyright (c) 2009-2014 The Bitcoin Core developers
  3. // Distributed under the MIT software license, see the accompanying
  4. // file COPYING or http://www.opensource.org/licenses/mit-license.php.
  5. #if defined(HAVE_CONFIG_H)
  6. #include "config/bitcoin-config.h"
  7. #endif
  8. #include "init.h"
  9. #include "addrman.h"
  10. #include "amount.h"
  11. #include "checkpoints.h"
  12. #include "compat/sanity.h"
  13. #include "key.h"
  14. #include "main.h"
  15. #include "miner.h"
  16. #include "net.h"
  17. #include "rpcserver.h"
  18. #include "script/standard.h"
  19. #include "txdb.h"
  20. #include "ui_interface.h"
  21. #include "util.h"
  22. #include "utilmoneystr.h"
  23. #include "validationinterface.h"
  24. #ifdef ENABLE_WALLET
  25. #include "wallet/wallet.h"
  26. #include "wallet/walletdb.h"
  27. #endif
  28. #include <stdint.h>
  29. #include <stdio.h>
  30. #ifndef WIN32
  31. #include <signal.h>
  32. #endif
  33. #include <boost/algorithm/string/predicate.hpp>
  34. #include <boost/algorithm/string/replace.hpp>
  35. #include <boost/filesystem.hpp>
  36. #include <boost/interprocess/sync/file_lock.hpp>
  37. #include <boost/thread.hpp>
  38. #include <openssl/crypto.h>
  39. using namespace std;
  40. #ifdef ENABLE_WALLET
  41. CWallet* pwalletMain = NULL;
  42. #endif
  43. bool fFeeEstimatesInitialized = false;
  44. #ifdef WIN32
  45. // Win32 LevelDB doesn't use filedescriptors, and the ones used for
  46. // accessing block files, don't count towards to fd_set size limit
  47. // anyway.
  48. #define MIN_CORE_FILEDESCRIPTORS 0
  49. #else
  50. #define MIN_CORE_FILEDESCRIPTORS 150
  51. #endif
  52. /** Used to pass flags to the Bind() function */
  53. enum BindFlags {
  54. BF_NONE = 0,
  55. BF_EXPLICIT = (1U << 0),
  56. BF_REPORT_ERROR = (1U << 1),
  57. BF_WHITELIST = (1U << 2),
  58. };
  59. static const char* FEE_ESTIMATES_FILENAME="fee_estimates.dat";
  60. CClientUIInterface uiInterface;
  61. //////////////////////////////////////////////////////////////////////////////
  62. //
  63. // Shutdown
  64. //
  65. //
  66. // Thread management and startup/shutdown:
  67. //
  68. // The network-processing threads are all part of a thread group
  69. // created by AppInit() or the Qt main() function.
  70. //
  71. // A clean exit happens when StartShutdown() or the SIGTERM
  72. // signal handler sets fRequestShutdown, which triggers
  73. // the DetectShutdownThread(), which interrupts the main thread group.
  74. // DetectShutdownThread() then exits, which causes AppInit() to
  75. // continue (it .joins the shutdown thread).
  76. // Shutdown() is then
  77. // called to clean up database connections, and stop other
  78. // threads that should only be stopped after the main network-processing
  79. // threads have exited.
  80. //
  81. // Note that if running -daemon the parent process returns from AppInit2
  82. // before adding any threads to the threadGroup, so .join_all() returns
  83. // immediately and the parent exits from main().
  84. //
  85. // Shutdown for Qt is very similar, only it uses a QTimer to detect
  86. // fRequestShutdown getting set, and then does the normal Qt
  87. // shutdown thing.
  88. //
  89. volatile bool fRequestShutdown = false;
  90. void StartShutdown()
  91. {
  92. fRequestShutdown = true;
  93. }
  94. bool ShutdownRequested()
  95. {
  96. return fRequestShutdown;
  97. }
  98. class CCoinsViewErrorCatcher : public CCoinsViewBacked
  99. {
  100. public:
  101. CCoinsViewErrorCatcher(CCoinsView* view) : CCoinsViewBacked(view) {}
  102. bool GetCoins(const uint256 &txid, CCoins &coins) const {
  103. try {
  104. return CCoinsViewBacked::GetCoins(txid, coins);
  105. } catch(const std::runtime_error& e) {
  106. uiInterface.ThreadSafeMessageBox(_("Error reading from database, shutting down."), "", CClientUIInterface::MSG_ERROR);
  107. LogPrintf("Error reading from database: %s\n", e.what());
  108. // Starting the shutdown sequence and returning false to the caller would be
  109. // interpreted as 'entry not found' (as opposed to unable to read data), and
  110. // could lead to invalid interpretation. Just exit immediately, as we can't
  111. // continue anyway, and all writes should be atomic.
  112. abort();
  113. }
  114. }
  115. // Writes do not need similar protection, as failure to write is handled by the caller.
  116. };
  117. static CCoinsViewDB *pcoinsdbview = NULL;
  118. static CCoinsViewErrorCatcher *pcoinscatcher = NULL;
  119. void Shutdown()
  120. {
  121. LogPrintf("%s: In progress...\n", __func__);
  122. static CCriticalSection cs_Shutdown;
  123. TRY_LOCK(cs_Shutdown, lockShutdown);
  124. if (!lockShutdown)
  125. return;
  126. /// Note: Shutdown() must be able to handle cases in which AppInit2() failed part of the way,
  127. /// for example if the data directory was found to be locked.
  128. /// Be sure that anything that writes files or flushes caches only does this if the respective
  129. /// module was initialized.
  130. RenameThread("bitcoin-shutoff");
  131. mempool.AddTransactionsUpdated(1);
  132. StopRPCThreads();
  133. #ifdef ENABLE_WALLET
  134. if (pwalletMain)
  135. pwalletMain->Flush(false);
  136. GenerateBitcoins(false, NULL, 0);
  137. #endif
  138. StopNode();
  139. UnregisterNodeSignals(GetNodeSignals());
  140. if (fFeeEstimatesInitialized)
  141. {
  142. boost::filesystem::path est_path = GetDataDir() / FEE_ESTIMATES_FILENAME;
  143. CAutoFile est_fileout(fopen(est_path.string().c_str(), "wb"), SER_DISK, CLIENT_VERSION);
  144. if (!est_fileout.IsNull())
  145. mempool.WriteFeeEstimates(est_fileout);
  146. else
  147. LogPrintf("%s: Failed to write fee estimates to %s\n", __func__, est_path.string());
  148. fFeeEstimatesInitialized = false;
  149. }
  150. {
  151. LOCK(cs_main);
  152. if (pcoinsTip != NULL) {
  153. FlushStateToDisk();
  154. }
  155. delete pcoinsTip;
  156. pcoinsTip = NULL;
  157. delete pcoinscatcher;
  158. pcoinscatcher = NULL;
  159. delete pcoinsdbview;
  160. pcoinsdbview = NULL;
  161. delete pblocktree;
  162. pblocktree = NULL;
  163. }
  164. #ifdef ENABLE_WALLET
  165. if (pwalletMain)
  166. pwalletMain->Flush(true);
  167. #endif
  168. #ifndef WIN32
  169. boost::filesystem::remove(GetPidFile());
  170. #endif
  171. UnregisterAllValidationInterfaces();
  172. #ifdef ENABLE_WALLET
  173. delete pwalletMain;
  174. pwalletMain = NULL;
  175. #endif
  176. LogPrintf("%s: done\n", __func__);
  177. }
  178. /**
  179. * Signal handlers are very limited in what they are allowed to do, so:
  180. */
  181. void HandleSIGTERM(int)
  182. {
  183. fRequestShutdown = true;
  184. }
  185. void HandleSIGHUP(int)
  186. {
  187. fReopenDebugLog = true;
  188. }
  189. bool static InitError(const std::string &str)
  190. {
  191. uiInterface.ThreadSafeMessageBox(str, "", CClientUIInterface::MSG_ERROR);
  192. return false;
  193. }
  194. bool static InitWarning(const std::string &str)
  195. {
  196. uiInterface.ThreadSafeMessageBox(str, "", CClientUIInterface::MSG_WARNING);
  197. return true;
  198. }
  199. bool static Bind(const CService &addr, unsigned int flags) {
  200. if (!(flags & BF_EXPLICIT) && IsLimited(addr))
  201. return false;
  202. std::string strError;
  203. if (!BindListenPort(addr, strError, (flags & BF_WHITELIST) != 0)) {
  204. if (flags & BF_REPORT_ERROR)
  205. return InitError(strError);
  206. return false;
  207. }
  208. return true;
  209. }
  210. void OnRPCStopped()
  211. {
  212. cvBlockChange.notify_all();
  213. LogPrint("rpc", "RPC stopped.\n");
  214. }
  215. void OnRPCPreCommand(const CRPCCommand& cmd)
  216. {
  217. // Observe safe mode
  218. string strWarning = GetWarnings("rpc");
  219. if (strWarning != "" && !GetBoolArg("-disablesafemode", false) &&
  220. !cmd.okSafeMode)
  221. throw JSONRPCError(RPC_FORBIDDEN_BY_SAFE_MODE, string("Safe mode: ") + strWarning);
  222. }
  223. std::string HelpMessage(HelpMessageMode mode)
  224. {
  225. // When adding new options to the categories, please keep and ensure alphabetical ordering.
  226. string strUsage = HelpMessageGroup(_("Options:"));
  227. strUsage += HelpMessageOpt("-?", _("This help message"));
  228. strUsage += HelpMessageOpt("-alertnotify=<cmd>", _("Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)"));
  229. strUsage += HelpMessageOpt("-blocknotify=<cmd>", _("Execute command when the best block changes (%s in cmd is replaced by block hash)"));
  230. strUsage += HelpMessageOpt("-checkblocks=<n>", strprintf(_("How many blocks to check at startup (default: %u, 0 = all)"), 288));
  231. strUsage += HelpMessageOpt("-checklevel=<n>", strprintf(_("How thorough the block verification of -checkblocks is (0-4, default: %u)"), 3));
  232. strUsage += HelpMessageOpt("-conf=<file>", strprintf(_("Specify configuration file (default: %s)"), "bitcoin.conf"));
  233. if (mode == HMM_BITCOIND)
  234. {
  235. #if !defined(WIN32)
  236. strUsage += HelpMessageOpt("-daemon", _("Run in the background as a daemon and accept commands"));
  237. #endif
  238. }
  239. strUsage += HelpMessageOpt("-datadir=<dir>", _("Specify data directory"));
  240. strUsage += HelpMessageOpt("-dbcache=<n>", strprintf(_("Set database cache size in megabytes (%d to %d, default: %d)"), nMinDbCache, nMaxDbCache, nDefaultDbCache));
  241. strUsage += HelpMessageOpt("-loadblock=<file>", _("Imports blocks from external blk000??.dat file") + " " + _("on startup"));
  242. strUsage += HelpMessageOpt("-maxorphantx=<n>", strprintf(_("Keep at most <n> unconnectable transactions in memory (default: %u)"), DEFAULT_MAX_ORPHAN_TRANSACTIONS));
  243. strUsage += HelpMessageOpt("-par=<n>", strprintf(_("Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d)"),
  244. -(int)boost::thread::hardware_concurrency(), MAX_SCRIPTCHECK_THREADS, DEFAULT_SCRIPTCHECK_THREADS));
  245. #ifndef WIN32
  246. strUsage += HelpMessageOpt("-pid=<file>", strprintf(_("Specify pid file (default: %s)"), "bitcoind.pid"));
  247. #endif
  248. strUsage += HelpMessageOpt("-prune=<n>", _("Reduce storage requirements by pruning (deleting) old blocks. This mode disables wallet support and is incompatible with -txindex.") + " " +
  249. _("Warning: Reverting this setting requires re-downloading the entire blockchain.") + " " +
  250. _("(default: 0 = disable pruning blocks,") + " " +
  251. strprintf(_(">%u = target size in MiB to use for block files)"), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024));
  252. strUsage += HelpMessageOpt("-reindex", _("Rebuild block chain index from current blk000??.dat files") + " " + _("on startup"));
  253. #if !defined(WIN32)
  254. strUsage += HelpMessageOpt("-sysperms", _("Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality)"));
  255. #endif
  256. strUsage += HelpMessageOpt("-txindex", strprintf(_("Maintain a full transaction index, used by the getrawtransaction rpc call (default: %u)"), 0));
  257. strUsage += HelpMessageGroup(_("Connection options:"));
  258. strUsage += HelpMessageOpt("-addnode=<ip>", _("Add a node to connect to and attempt to keep the connection open"));
  259. strUsage += HelpMessageOpt("-banscore=<n>", strprintf(_("Threshold for disconnecting misbehaving peers (default: %u)"), 100));
  260. strUsage += HelpMessageOpt("-bantime=<n>", strprintf(_("Number of seconds to keep misbehaving peers from reconnecting (default: %u)"), 86400));
  261. strUsage += HelpMessageOpt("-bind=<addr>", _("Bind to given address and always listen on it. Use [host]:port notation for IPv6"));
  262. strUsage += HelpMessageOpt("-connect=<ip>", _("Connect only to the specified node(s)"));
  263. strUsage += HelpMessageOpt("-discover", _("Discover own IP addresses (default: 1 when listening and no -externalip or -proxy)"));
  264. strUsage += HelpMessageOpt("-dns", _("Allow DNS lookups for -addnode, -seednode and -connect") + " " + _("(default: 1)"));
  265. strUsage += HelpMessageOpt("-dnsseed", _("Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect)"));
  266. strUsage += HelpMessageOpt("-externalip=<ip>", _("Specify your own public address"));
  267. strUsage += HelpMessageOpt("-forcednsseed", strprintf(_("Always query for peer addresses via DNS lookup (default: %u)"), 0));
  268. strUsage += HelpMessageOpt("-listen", _("Accept connections from outside (default: 1 if no -proxy or -connect)"));
  269. strUsage += HelpMessageOpt("-maxconnections=<n>", strprintf(_("Maintain at most <n> connections to peers (default: %u)"), 125));
  270. strUsage += HelpMessageOpt("-maxreceivebuffer=<n>", strprintf(_("Maximum per-connection receive buffer, <n>*1000 bytes (default: %u)"), 5000));
  271. strUsage += HelpMessageOpt("-maxsendbuffer=<n>", strprintf(_("Maximum per-connection send buffer, <n>*1000 bytes (default: %u)"), 1000));
  272. strUsage += HelpMessageOpt("-onion=<ip:port>", strprintf(_("Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s)"), "-proxy"));
  273. strUsage += HelpMessageOpt("-onlynet=<net>", _("Only connect to nodes in network <net> (ipv4, ipv6 or onion)"));
  274. strUsage += HelpMessageOpt("-permitbaremultisig", strprintf(_("Relay non-P2SH multisig (default: %u)"), 1));
  275. strUsage += HelpMessageOpt("-port=<port>", strprintf(_("Listen for connections on <port> (default: %u or testnet: %u)"), 8333, 18333));
  276. strUsage += HelpMessageOpt("-proxy=<ip:port>", _("Connect through SOCKS5 proxy"));
  277. strUsage += HelpMessageOpt("-proxyrandomize", strprintf(_("Randomize credentials for every proxy connection. This enables Tor stream isolation (default: %u)"), 1));
  278. strUsage += HelpMessageOpt("-seednode=<ip>", _("Connect to a node to retrieve peer addresses, and disconnect"));
  279. strUsage += HelpMessageOpt("-timeout=<n>", strprintf(_("Specify connection timeout in milliseconds (minimum: 1, default: %d)"), DEFAULT_CONNECT_TIMEOUT));
  280. #ifdef USE_UPNP
  281. #if USE_UPNP
  282. strUsage += HelpMessageOpt("-upnp", _("Use UPnP to map the listening port (default: 1 when listening)"));
  283. #else
  284. strUsage += HelpMessageOpt("-upnp", strprintf(_("Use UPnP to map the listening port (default: %u)"), 0));
  285. #endif
  286. #endif
  287. strUsage += HelpMessageOpt("-whitebind=<addr>", _("Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6"));
  288. strUsage += HelpMessageOpt("-whitelist=<netmask>", _("Whitelist peers connecting from the given netmask or IP address. Can be specified multiple times.") +
  289. " " + _("Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway"));
  290. #ifdef ENABLE_WALLET
  291. strUsage += HelpMessageGroup(_("Wallet options:"));
  292. strUsage += HelpMessageOpt("-disablewallet", _("Do not load the wallet and disable wallet RPC calls"));
  293. strUsage += HelpMessageOpt("-keypool=<n>", strprintf(_("Set key pool size to <n> (default: %u)"), 100));
  294. if (GetBoolArg("-help-debug", false))
  295. strUsage += HelpMessageOpt("-mintxfee=<amt>", strprintf(_("Fees (in BTC/Kb) smaller than this are considered zero fee for transaction creation (default: %s)"),
  296. FormatMoney(CWallet::minTxFee.GetFeePerK())));
  297. strUsage += HelpMessageOpt("-paytxfee=<amt>", strprintf(_("Fee (in BTC/kB) to add to transactions you send (default: %s)"), FormatMoney(payTxFee.GetFeePerK())));
  298. strUsage += HelpMessageOpt("-rescan", _("Rescan the block chain for missing wallet transactions") + " " + _("on startup"));
  299. strUsage += HelpMessageOpt("-salvagewallet", _("Attempt to recover private keys from a corrupt wallet.dat") + " " + _("on startup"));
  300. strUsage += HelpMessageOpt("-sendfreetransactions", strprintf(_("Send transactions as zero-fee transactions if possible (default: %u)"), 0));
  301. strUsage += HelpMessageOpt("-spendzeroconfchange", strprintf(_("Spend unconfirmed change when sending transactions (default: %u)"), 1));
  302. strUsage += HelpMessageOpt("-txconfirmtarget=<n>", strprintf(_("If paytxfee is not set, include enough fee so transactions begin confirmation on average within n blocks (default: %u)"), 1));
  303. strUsage += HelpMessageOpt("-maxtxfee=<amt>", strprintf(_("Maximum total fees to use in a single wallet transaction, setting too low may abort large transactions (default: %s)"),
  304. FormatMoney(maxTxFee)));
  305. strUsage += HelpMessageOpt("-upgradewallet", _("Upgrade wallet to latest format") + " " + _("on startup"));
  306. strUsage += HelpMessageOpt("-wallet=<file>", _("Specify wallet file (within data directory)") + " " + strprintf(_("(default: %s)"), "wallet.dat"));
  307. strUsage += HelpMessageOpt("-walletbroadcast", _("Make the wallet broadcast transactions") + " " + strprintf(_("(default: %u)"), true));
  308. strUsage += HelpMessageOpt("-walletnotify=<cmd>", _("Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)"));
  309. strUsage += HelpMessageOpt("-zapwallettxes=<mode>", _("Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup") +
  310. " " + _("(1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data)"));
  311. #endif
  312. strUsage += HelpMessageGroup(_("Debugging/Testing options:"));
  313. if (GetBoolArg("-help-debug", false))
  314. {
  315. strUsage += HelpMessageOpt("-checkpoints", strprintf(_("Only accept block chain matching built-in checkpoints (default: %u)"), 1));
  316. strUsage += HelpMessageOpt("-dblogsize=<n>", strprintf(_("Flush database activity from memory pool to disk log every <n> megabytes (default: %u)"), 100));
  317. strUsage += HelpMessageOpt("-disablesafemode", strprintf(_("Disable safemode, override a real safe mode event (default: %u)"), 0));
  318. strUsage += HelpMessageOpt("-testsafemode", strprintf(_("Force safe mode (default: %u)"), 0));
  319. strUsage += HelpMessageOpt("-dropmessagestest=<n>", _("Randomly drop 1 of every <n> network messages"));
  320. strUsage += HelpMessageOpt("-fuzzmessagestest=<n>", _("Randomly fuzz 1 of every <n> network messages"));
  321. strUsage += HelpMessageOpt("-flushwallet", strprintf(_("Run a thread to flush wallet periodically (default: %u)"), 1));
  322. strUsage += HelpMessageOpt("-stopafterblockimport", strprintf(_("Stop running after importing blocks from disk (default: %u)"), 0));
  323. }
  324. string debugCategories = "addrman, alert, bench, coindb, db, lock, rand, rpc, selectcoins, mempool, net, proxy, prune"; // Don't translate these and qt below
  325. if (mode == HMM_BITCOIN_QT)
  326. debugCategories += ", qt";
  327. strUsage += HelpMessageOpt("-debug=<category>", strprintf(_("Output debugging information (default: %u, supplying <category> is optional)"), 0) + ". " +
  328. _("If <category> is not supplied, output all debugging information.") + _("<category> can be:") + " " + debugCategories + ".");
  329. #ifdef ENABLE_WALLET
  330. strUsage += HelpMessageOpt("-gen", strprintf(_("Generate coins (default: %u)"), 0));
  331. strUsage += HelpMessageOpt("-genproclimit=<n>", strprintf(_("Set the number of threads for coin generation if enabled (-1 = all cores, default: %d)"), 1));
  332. #endif
  333. strUsage += HelpMessageOpt("-help-debug", _("Show all debugging options (usage: --help -help-debug)"));
  334. strUsage += HelpMessageOpt("-logips", strprintf(_("Include IP addresses in debug output (default: %u)"), 0));
  335. strUsage += HelpMessageOpt("-logtimestamps", strprintf(_("Prepend debug output with timestamp (default: %u)"), 1));
  336. if (GetBoolArg("-help-debug", false))
  337. {
  338. strUsage += HelpMessageOpt("-limitfreerelay=<n>", strprintf(_("Continuously rate-limit free transactions to <n>*1000 bytes per minute (default: %u)"), 15));
  339. strUsage += HelpMessageOpt("-relaypriority", strprintf(_("Require high priority for relaying free or low-fee transactions (default: %u)"), 1));
  340. strUsage += HelpMessageOpt("-maxsigcachesize=<n>", strprintf(_("Limit size of signature cache to <n> entries (default: %u)"), 50000));
  341. }
  342. strUsage += HelpMessageOpt("-minrelaytxfee=<amt>", strprintf(_("Fees (in BTC/Kb) smaller than this are considered zero fee for relaying (default: %s)"), FormatMoney(::minRelayTxFee.GetFeePerK())));
  343. strUsage += HelpMessageOpt("-printtoconsole", _("Send trace/debug info to console instead of debug.log file"));
  344. if (GetBoolArg("-help-debug", false))
  345. {
  346. strUsage += HelpMessageOpt("-printpriority", strprintf(_("Log transaction priority and fee per kB when mining blocks (default: %u)"), 0));
  347. strUsage += HelpMessageOpt("-privdb", strprintf(_("Sets the DB_PRIVATE flag in the wallet db environment (default: %u)"), 1));
  348. strUsage += HelpMessageOpt("-regtest", _("Enter regression test mode, which uses a special chain in which blocks can be solved instantly.") + " " +
  349. _("This is intended for regression testing tools and app development.") + " " +
  350. _("In this mode -genproclimit controls how many blocks are generated immediately."));
  351. }
  352. strUsage += HelpMessageOpt("-shrinkdebugfile", _("Shrink debug.log file on client startup (default: 1 when no -debug)"));
  353. strUsage += HelpMessageOpt("-testnet", _("Use the test network"));
  354. strUsage += HelpMessageGroup(_("Node relay options:"));
  355. strUsage += HelpMessageOpt("-datacarrier", strprintf(_("Relay and mine data carrier transactions (default: %u)"), 1));
  356. strUsage += HelpMessageOpt("-datacarriersize", strprintf(_("Maximum size of data in data carrier transactions we relay and mine (default: %u)"), MAX_OP_RETURN_RELAY));
  357. strUsage += HelpMessageGroup(_("Block creation options:"));
  358. strUsage += HelpMessageOpt("-blockminsize=<n>", strprintf(_("Set minimum block size in bytes (default: %u)"), 0));
  359. strUsage += HelpMessageOpt("-blockmaxsize=<n>", strprintf(_("Set maximum block size in bytes (default: %d)"), DEFAULT_BLOCK_MAX_SIZE));
  360. strUsage += HelpMessageOpt("-blockprioritysize=<n>", strprintf(_("Set maximum size of high-priority/low-fee transactions in bytes (default: %d)"), DEFAULT_BLOCK_PRIORITY_SIZE));
  361. strUsage += HelpMessageGroup(_("RPC server options:"));
  362. strUsage += HelpMessageOpt("-server", _("Accept command line and JSON-RPC commands"));
  363. strUsage += HelpMessageOpt("-rest", strprintf(_("Accept public REST requests (default: %u)"), 0));
  364. strUsage += HelpMessageOpt("-rpcbind=<addr>", _("Bind to given address to listen for JSON-RPC connections. Use [host]:port notation for IPv6. This option can be specified multiple times (default: bind to all interfaces)"));
  365. strUsage += HelpMessageOpt("-rpcuser=<user>", _("Username for JSON-RPC connections"));
  366. strUsage += HelpMessageOpt("-rpcpassword=<pw>", _("Password for JSON-RPC connections"));
  367. strUsage += HelpMessageOpt("-rpcport=<port>", strprintf(_("Listen for JSON-RPC connections on <port> (default: %u or testnet: %u)"), 8332, 18332));
  368. strUsage += HelpMessageOpt("-rpcallowip=<ip>", _("Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times"));
  369. strUsage += HelpMessageOpt("-rpcthreads=<n>", strprintf(_("Set the number of threads to service RPC calls (default: %d)"), 4));
  370. strUsage += HelpMessageOpt("-rpckeepalive", strprintf(_("RPC support for HTTP persistent connections (default: %d)"), 1));
  371. strUsage += HelpMessageGroup(_("RPC SSL options: (see the Bitcoin Wiki for SSL setup instructions)"));
  372. strUsage += HelpMessageOpt("-rpcssl", _("Use OpenSSL (https) for JSON-RPC connections"));
  373. strUsage += HelpMessageOpt("-rpcsslcertificatechainfile=<file.cert>", strprintf(_("Server certificate file (default: %s)"), "server.cert"));
  374. strUsage += HelpMessageOpt("-rpcsslprivatekeyfile=<file.pem>", strprintf(_("Server private key (default: %s)"), "server.pem"));
  375. strUsage += HelpMessageOpt("-rpcsslciphers=<ciphers>", strprintf(_("Acceptable ciphers (default: %s)"), "TLSv1.2+HIGH:TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!3DES:@STRENGTH"));
  376. if (mode == HMM_BITCOIN_QT)
  377. {
  378. strUsage += HelpMessageGroup(_("UI Options:"));
  379. if (GetBoolArg("-help-debug", false)) {
  380. strUsage += HelpMessageOpt("-allowselfsignedrootcertificates", _("Allow self signed root certificates (default: 0)"));
  381. }
  382. strUsage += HelpMessageOpt("-choosedatadir", _("Choose data directory on startup (default: 0)"));
  383. strUsage += HelpMessageOpt("-lang=<lang>", _("Set language, for example \"de_DE\" (default: system locale)"));
  384. strUsage += HelpMessageOpt("-min", _("Start minimized"));
  385. strUsage += HelpMessageOpt("-rootcertificates=<file>", _("Set SSL root certificates for payment request (default: -system-)"));
  386. strUsage += HelpMessageOpt("-splash", _("Show splash screen on startup (default: 1)"));
  387. }
  388. return strUsage;
  389. }
  390. std::string LicenseInfo()
  391. {
  392. return FormatParagraph(strprintf(_("Copyright (C) 2009-%i The Bitcoin Core Developers"), COPYRIGHT_YEAR)) + "\n" +
  393. "\n" +
  394. FormatParagraph(_("This is experimental software.")) + "\n" +
  395. "\n" +
  396. FormatParagraph(_("Distributed under the MIT software license, see the accompanying file COPYING or <http://www.opensource.org/licenses/mit-license.php>.")) + "\n" +
  397. "\n" +
  398. FormatParagraph(_("This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit <https://www.openssl.org/> and cryptographic software written by Eric Young and UPnP software written by Thomas Bernard.")) +
  399. "\n";
  400. }
  401. static void BlockNotifyCallback(const uint256& hashNewTip)
  402. {
  403. std::string strCmd = GetArg("-blocknotify", "");
  404. boost::replace_all(strCmd, "%s", hashNewTip.GetHex());
  405. boost::thread t(runCommand, strCmd); // thread runs free
  406. }
  407. struct CImportingNow
  408. {
  409. CImportingNow() {
  410. assert(fImporting == false);
  411. fImporting = true;
  412. }
  413. ~CImportingNow() {
  414. assert(fImporting == true);
  415. fImporting = false;
  416. }
  417. };
  418. // If we're using -prune with -reindex, then delete block files that will be ignored by the
  419. // reindex. Since reindexing works by starting at block file 0 and looping until a blockfile
  420. // is missing, and since pruning works by deleting the oldest block file first, just check
  421. // for block file 0, and if it doesn't exist, delete all the block files in the
  422. // directory (since they won't be read by the reindex but will take up disk space).
  423. void DeleteAllBlockFiles()
  424. {
  425. if (boost::filesystem::exists(GetBlockPosFilename(CDiskBlockPos(0, 0), "blk")))
  426. return;
  427. LogPrintf("Removing all blk?????.dat and rev?????.dat files for -reindex with -prune\n");
  428. boost::filesystem::path blocksdir = GetDataDir() / "blocks";
  429. for (boost::filesystem::directory_iterator it(blocksdir); it != boost::filesystem::directory_iterator(); it++) {
  430. if (is_regular_file(*it)) {
  431. if ((it->path().filename().string().length() == 12) &&
  432. (it->path().filename().string().substr(8,4) == ".dat") &&
  433. ((it->path().filename().string().substr(0,3) == "blk") ||
  434. (it->path().filename().string().substr(0,3) == "rev")))
  435. boost::filesystem::remove(it->path());
  436. }
  437. }
  438. }
  439. void ThreadImport(std::vector<boost::filesystem::path> vImportFiles)
  440. {
  441. RenameThread("bitcoin-loadblk");
  442. // -reindex
  443. if (fReindex) {
  444. CImportingNow imp;
  445. int nFile = 0;
  446. while (true) {
  447. CDiskBlockPos pos(nFile, 0);
  448. if (!boost::filesystem::exists(GetBlockPosFilename(pos, "blk")))
  449. break; // No block files left to reindex
  450. FILE *file = OpenBlockFile(pos, true);
  451. if (!file)
  452. break; // This error is logged in OpenBlockFile
  453. LogPrintf("Reindexing block file blk%05u.dat...\n", (unsigned int)nFile);
  454. LoadExternalBlockFile(file, &pos);
  455. nFile++;
  456. }
  457. pblocktree->WriteReindexing(false);
  458. fReindex = false;
  459. LogPrintf("Reindexing finished\n");
  460. // To avoid ending up in a situation without genesis block, re-try initializing (no-op if reindexing worked):
  461. InitBlockIndex();
  462. }
  463. // hardcoded $DATADIR/bootstrap.dat
  464. boost::filesystem::path pathBootstrap = GetDataDir() / "bootstrap.dat";
  465. if (boost::filesystem::exists(pathBootstrap)) {
  466. FILE *file = fopen(pathBootstrap.string().c_str(), "rb");
  467. if (file) {
  468. CImportingNow imp;
  469. boost::filesystem::path pathBootstrapOld = GetDataDir() / "bootstrap.dat.old";
  470. LogPrintf("Importing bootstrap.dat...\n");
  471. LoadExternalBlockFile(file);
  472. RenameOver(pathBootstrap, pathBootstrapOld);
  473. } else {
  474. LogPrintf("Warning: Could not open bootstrap file %s\n", pathBootstrap.string());
  475. }
  476. }
  477. // -loadblock=
  478. BOOST_FOREACH(boost::filesystem::path &path, vImportFiles) {
  479. FILE *file = fopen(path.string().c_str(), "rb");
  480. if (file) {
  481. CImportingNow imp;
  482. LogPrintf("Importing blocks file %s...\n", path.string());
  483. LoadExternalBlockFile(file);
  484. } else {
  485. LogPrintf("Warning: Could not open blocks file %s\n", path.string());
  486. }
  487. }
  488. if (GetBoolArg("-stopafterblockimport", false)) {
  489. LogPrintf("Stopping after block import\n");
  490. StartShutdown();
  491. }
  492. }
  493. /** Sanity checks
  494. * Ensure that Bitcoin is running in a usable environment with all
  495. * necessary library support.
  496. */
  497. bool InitSanityCheck(void)
  498. {
  499. if(!ECC_InitSanityCheck()) {
  500. InitError("OpenSSL appears to lack support for elliptic curve cryptography. For more "
  501. "information, visit https://en.bitcoin.it/wiki/OpenSSL_and_EC_Libraries");
  502. return false;
  503. }
  504. if (!glibc_sanity_test() || !glibcxx_sanity_test())
  505. return false;
  506. return true;
  507. }
  508. /** Initialize bitcoin.
  509. * @pre Parameters should be parsed and config file should be read.
  510. */
  511. bool AppInit2(boost::thread_group& threadGroup)
  512. {
  513. // ********************************************************* Step 1: setup
  514. #ifdef _MSC_VER
  515. // Turn off Microsoft heap dump noise
  516. _CrtSetReportMode(_CRT_WARN, _CRTDBG_MODE_FILE);
  517. _CrtSetReportFile(_CRT_WARN, CreateFileA("NUL", GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, 0));
  518. #endif
  519. #if _MSC_VER >= 1400
  520. // Disable confusing "helpful" text message on abort, Ctrl-C
  521. _set_abort_behavior(0, _WRITE_ABORT_MSG | _CALL_REPORTFAULT);
  522. #endif
  523. #ifdef WIN32
  524. // Enable Data Execution Prevention (DEP)
  525. // Minimum supported OS versions: WinXP SP3, WinVista >= SP1, Win Server 2008
  526. // A failure is non-critical and needs no further attention!
  527. #ifndef PROCESS_DEP_ENABLE
  528. // We define this here, because GCCs winbase.h limits this to _WIN32_WINNT >= 0x0601 (Windows 7),
  529. // which is not correct. Can be removed, when GCCs winbase.h is fixed!
  530. #define PROCESS_DEP_ENABLE 0x00000001
  531. #endif
  532. typedef BOOL (WINAPI *PSETPROCDEPPOL)(DWORD);
  533. PSETPROCDEPPOL setProcDEPPol = (PSETPROCDEPPOL)GetProcAddress(GetModuleHandleA("Kernel32.dll"), "SetProcessDEPPolicy");
  534. if (setProcDEPPol != NULL) setProcDEPPol(PROCESS_DEP_ENABLE);
  535. // Initialize Windows Sockets
  536. WSADATA wsadata;
  537. int ret = WSAStartup(MAKEWORD(2,2), &wsadata);
  538. if (ret != NO_ERROR || LOBYTE(wsadata.wVersion ) != 2 || HIBYTE(wsadata.wVersion) != 2)
  539. {
  540. return InitError(strprintf("Error: Winsock library failed to start (WSAStartup returned error %d)", ret));
  541. }
  542. #endif
  543. #ifndef WIN32
  544. if (GetBoolArg("-sysperms", false)) {
  545. #ifdef ENABLE_WALLET
  546. if (!GetBoolArg("-disablewallet", false))
  547. return InitError("Error: -sysperms is not allowed in combination with enabled wallet functionality");
  548. #endif
  549. } else {
  550. umask(077);
  551. }
  552. // Clean shutdown on SIGTERM
  553. struct sigaction sa;
  554. sa.sa_handler = HandleSIGTERM;
  555. sigemptyset(&sa.sa_mask);
  556. sa.sa_flags = 0;
  557. sigaction(SIGTERM, &sa, NULL);
  558. sigaction(SIGINT, &sa, NULL);
  559. // Reopen debug.log on SIGHUP
  560. struct sigaction sa_hup;
  561. sa_hup.sa_handler = HandleSIGHUP;
  562. sigemptyset(&sa_hup.sa_mask);
  563. sa_hup.sa_flags = 0;
  564. sigaction(SIGHUP, &sa_hup, NULL);
  565. #if defined (__SVR4) && defined (__sun)
  566. // ignore SIGPIPE on Solaris
  567. signal(SIGPIPE, SIG_IGN);
  568. #endif
  569. #endif
  570. // ********************************************************* Step 2: parameter interactions
  571. const CChainParams& chainparams = Params();
  572. // Set this early so that parameter interactions go to console
  573. fPrintToConsole = GetBoolArg("-printtoconsole", false);
  574. fLogTimestamps = GetBoolArg("-logtimestamps", true);
  575. fLogIPs = GetBoolArg("-logips", false);
  576. // when specifying an explicit binding address, you want to listen on it
  577. // even when -connect or -proxy is specified
  578. if (mapArgs.count("-bind")) {
  579. if (SoftSetBoolArg("-listen", true))
  580. LogPrintf("%s: parameter interaction: -bind set -> setting -listen=1\n", __func__);
  581. }
  582. if (mapArgs.count("-whitebind")) {
  583. if (SoftSetBoolArg("-listen", true))
  584. LogPrintf("%s: parameter interaction: -whitebind set -> setting -listen=1\n", __func__);
  585. }
  586. if (mapArgs.count("-connect") && mapMultiArgs["-connect"].size() > 0) {
  587. // when only connecting to trusted nodes, do not seed via DNS, or listen by default
  588. if (SoftSetBoolArg("-dnsseed", false))
  589. LogPrintf("%s: parameter interaction: -connect set -> setting -dnsseed=0\n", __func__);
  590. if (SoftSetBoolArg("-listen", false))
  591. LogPrintf("%s: parameter interaction: -connect set -> setting -listen=0\n", __func__);
  592. }
  593. if (mapArgs.count("-proxy")) {
  594. // to protect privacy, do not listen by default if a default proxy server is specified
  595. if (SoftSetBoolArg("-listen", false))
  596. LogPrintf("%s: parameter interaction: -proxy set -> setting -listen=0\n", __func__);
  597. // to protect privacy, do not discover addresses by default
  598. if (SoftSetBoolArg("-discover", false))
  599. LogPrintf("%s: parameter interaction: -proxy set -> setting -discover=0\n", __func__);
  600. }
  601. if (!GetBoolArg("-listen", DEFAULT_LISTEN)) {
  602. // do not map ports or try to retrieve public IP when not listening (pointless)
  603. if (SoftSetBoolArg("-upnp", false))
  604. LogPrintf("%s: parameter interaction: -listen=0 -> setting -upnp=0\n", __func__);
  605. if (SoftSetBoolArg("-discover", false))
  606. LogPrintf("%s: parameter interaction: -listen=0 -> setting -discover=0\n", __func__);
  607. }
  608. if (mapArgs.count("-externalip")) {
  609. // if an explicit public IP is specified, do not try to find others
  610. if (SoftSetBoolArg("-discover", false))
  611. LogPrintf("%s: parameter interaction: -externalip set -> setting -discover=0\n", __func__);
  612. }
  613. if (GetBoolArg("-salvagewallet", false)) {
  614. // Rewrite just private keys: rescan to find transactions
  615. if (SoftSetBoolArg("-rescan", true))
  616. LogPrintf("%s: parameter interaction: -salvagewallet=1 -> setting -rescan=1\n", __func__);
  617. }
  618. // -zapwallettx implies a rescan
  619. if (GetBoolArg("-zapwallettxes", false)) {
  620. if (SoftSetBoolArg("-rescan", true))
  621. LogPrintf("%s: parameter interaction: -zapwallettxes=<mode> -> setting -rescan=1\n", __func__);
  622. }
  623. // Make sure enough file descriptors are available
  624. int nBind = std::max((int)mapArgs.count("-bind") + (int)mapArgs.count("-whitebind"), 1);
  625. nMaxConnections = GetArg("-maxconnections", 125);
  626. nMaxConnections = std::max(std::min(nMaxConnections, (int)(FD_SETSIZE - nBind - MIN_CORE_FILEDESCRIPTORS)), 0);
  627. int nFD = RaiseFileDescriptorLimit(nMaxConnections + MIN_CORE_FILEDESCRIPTORS);
  628. if (nFD < MIN_CORE_FILEDESCRIPTORS)
  629. return InitError(_("Not enough file descriptors available."));
  630. if (nFD - MIN_CORE_FILEDESCRIPTORS < nMaxConnections)
  631. nMaxConnections = nFD - MIN_CORE_FILEDESCRIPTORS;
  632. // if using block pruning, then disable txindex
  633. // also disable the wallet (for now, until SPV support is implemented in wallet)
  634. if (GetArg("-prune", 0)) {
  635. if (GetBoolArg("-txindex", false))
  636. return InitError(_("Prune mode is incompatible with -txindex."));
  637. #ifdef ENABLE_WALLET
  638. if (!GetBoolArg("-disablewallet", false)) {
  639. if (SoftSetBoolArg("-disablewallet", true))
  640. LogPrintf("%s : parameter interaction: -prune -> setting -disablewallet=1\n", __func__);
  641. else
  642. return InitError(_("Can't run with a wallet in prune mode."));
  643. }
  644. #endif
  645. }
  646. // ********************************************************* Step 3: parameter-to-internal-flags
  647. fDebug = !mapMultiArgs["-debug"].empty();
  648. // Special-case: if -debug=0/-nodebug is set, turn off debugging messages
  649. const vector<string>& categories = mapMultiArgs["-debug"];
  650. if (GetBoolArg("-nodebug", false) || find(categories.begin(), categories.end(), string("0")) != categories.end())
  651. fDebug = false;
  652. // Check for -debugnet
  653. if (GetBoolArg("-debugnet", false))
  654. InitWarning(_("Warning: Unsupported argument -debugnet ignored, use -debug=net."));
  655. // Check for -socks - as this is a privacy risk to continue, exit here
  656. if (mapArgs.count("-socks"))
  657. return InitError(_("Error: Unsupported argument -socks found. Setting SOCKS version isn't possible anymore, only SOCKS5 proxies are supported."));
  658. // Check for -tor - as this is a privacy risk to continue, exit here
  659. if (GetBoolArg("-tor", false))
  660. return InitError(_("Error: Unsupported argument -tor found, use -onion."));
  661. if (GetBoolArg("-benchmark", false))
  662. InitWarning(_("Warning: Unsupported argument -benchmark ignored, use -debug=bench."));
  663. // Checkmempool and checkblockindex default to true in regtest mode
  664. mempool.setSanityCheck(GetBoolArg("-checkmempool", chainparams.DefaultConsistencyChecks()));
  665. fCheckBlockIndex = GetBoolArg("-checkblockindex", chainparams.DefaultConsistencyChecks());
  666. Checkpoints::fEnabled = GetBoolArg("-checkpoints", true);
  667. // -par=0 means autodetect, but nScriptCheckThreads==0 means no concurrency
  668. nScriptCheckThreads = GetArg("-par", DEFAULT_SCRIPTCHECK_THREADS);
  669. if (nScriptCheckThreads <= 0)
  670. nScriptCheckThreads += boost::thread::hardware_concurrency();
  671. if (nScriptCheckThreads <= 1)
  672. nScriptCheckThreads = 0;
  673. else if (nScriptCheckThreads > MAX_SCRIPTCHECK_THREADS)
  674. nScriptCheckThreads = MAX_SCRIPTCHECK_THREADS;
  675. fServer = GetBoolArg("-server", false);
  676. // block pruning; get the amount of disk space (in MB) to allot for block & undo files
  677. int64_t nSignedPruneTarget = GetArg("-prune", 0) * 1024 * 1024;
  678. if (nSignedPruneTarget < 0) {
  679. return InitError(_("Prune cannot be configured with a negative value."));
  680. }
  681. nPruneTarget = (uint64_t) nSignedPruneTarget;
  682. if (nPruneTarget) {
  683. if (nPruneTarget < MIN_DISK_SPACE_FOR_BLOCK_FILES) {
  684. return InitError(strprintf(_("Prune configured below the minimum of %d MB. Please use a higher number."), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024));
  685. }
  686. LogPrintf("Prune configured to target %uMiB on disk for block and undo files.\n", nPruneTarget / 1024 / 1024);
  687. fPruneMode = true;
  688. }
  689. #ifdef ENABLE_WALLET
  690. bool fDisableWallet = GetBoolArg("-disablewallet", false);
  691. #endif
  692. nConnectTimeout = GetArg("-timeout", DEFAULT_CONNECT_TIMEOUT);
  693. if (nConnectTimeout <= 0)
  694. nConnectTimeout = DEFAULT_CONNECT_TIMEOUT;
  695. // Continue to put "/P2SH/" in the coinbase to monitor
  696. // BIP16 support.
  697. // This can be removed eventually...
  698. const char* pszP2SH = "/P2SH/";
  699. COINBASE_FLAGS << std::vector<unsigned char>(pszP2SH, pszP2SH+strlen(pszP2SH));
  700. // Fee-per-kilobyte amount considered the same as "free"
  701. // If you are mining, be careful setting this:
  702. // if you set it to zero then
  703. // a transaction spammer can cheaply fill blocks using
  704. // 1-satoshi-fee transactions. It should be set above the real
  705. // cost to you of processing a transaction.
  706. if (mapArgs.count("-minrelaytxfee"))
  707. {
  708. CAmount n = 0;
  709. if (ParseMoney(mapArgs["-minrelaytxfee"], n) && n > 0)
  710. ::minRelayTxFee = CFeeRate(n);
  711. else
  712. return InitError(strprintf(_("Invalid amount for -minrelaytxfee=<amount>: '%s'"), mapArgs["-minrelaytxfee"]));
  713. }
  714. #ifdef ENABLE_WALLET
  715. if (mapArgs.count("-mintxfee"))
  716. {
  717. CAmount n = 0;
  718. if (ParseMoney(mapArgs["-mintxfee"], n) && n > 0)
  719. CWallet::minTxFee = CFeeRate(n);
  720. else
  721. return InitError(strprintf(_("Invalid amount for -mintxfee=<amount>: '%s'"), mapArgs["-mintxfee"]));
  722. }
  723. if (mapArgs.count("-paytxfee"))
  724. {
  725. CAmount nFeePerK = 0;
  726. if (!ParseMoney(mapArgs["-paytxfee"], nFeePerK))
  727. return InitError(strprintf(_("Invalid amount for -paytxfee=<amount>: '%s'"), mapArgs["-paytxfee"]));
  728. if (nFeePerK > nHighTransactionFeeWarning)
  729. InitWarning(_("Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction."));
  730. payTxFee = CFeeRate(nFeePerK, 1000);
  731. if (payTxFee < ::minRelayTxFee)
  732. {
  733. return InitError(strprintf(_("Invalid amount for -paytxfee=<amount>: '%s' (must be at least %s)"),
  734. mapArgs["-paytxfee"], ::minRelayTxFee.ToString()));
  735. }
  736. }
  737. if (mapArgs.count("-maxtxfee"))
  738. {
  739. CAmount nMaxFee = 0;
  740. if (!ParseMoney(mapArgs["-maxtxfee"], nMaxFee))
  741. return InitError(strprintf(_("Invalid amount for -maxtxfee=<amount>: '%s'"), mapArgs["-maptxfee"]));
  742. if (nMaxFee > nHighTransactionMaxFeeWarning)
  743. InitWarning(_("Warning: -maxtxfee is set very high! Fees this large could be paid on a single transaction."));
  744. maxTxFee = nMaxFee;
  745. if (CFeeRate(maxTxFee, 1000) < ::minRelayTxFee)
  746. {
  747. return InitError(strprintf(_("Invalid amount for -maxtxfee=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions)"),
  748. mapArgs["-maxtxfee"], ::minRelayTxFee.ToString()));
  749. }
  750. }
  751. nTxConfirmTarget = GetArg("-txconfirmtarget", 1);
  752. bSpendZeroConfChange = GetArg("-spendzeroconfchange", true);
  753. fSendFreeTransactions = GetArg("-sendfreetransactions", false);
  754. std::string strWalletFile = GetArg("-wallet", "wallet.dat");
  755. #endif // ENABLE_WALLET
  756. fIsBareMultisigStd = GetArg("-permitbaremultisig", true) != 0;
  757. nMaxDatacarrierBytes = GetArg("-datacarriersize", nMaxDatacarrierBytes);
  758. // ********************************************************* Step 4: application initialization: dir lock, daemonize, pidfile, debug log
  759. // Sanity check
  760. if (!InitSanityCheck())
  761. return InitError(_("Initialization sanity check failed. Bitcoin Core is shutting down."));
  762. std::string strDataDir = GetDataDir().string();
  763. #ifdef ENABLE_WALLET
  764. // Wallet file must be a plain filename without a directory
  765. if (strWalletFile != boost::filesystem::basename(strWalletFile) + boost::filesystem::extension(strWalletFile))
  766. return InitError(strprintf(_("Wallet %s resides outside data directory %s"), strWalletFile, strDataDir));
  767. #endif
  768. // Make sure only a single Bitcoin process is using the data directory.
  769. boost::filesystem::path pathLockFile = GetDataDir() / ".lock";
  770. FILE* file = fopen(pathLockFile.string().c_str(), "a"); // empty lock file; created if it doesn't exist.
  771. if (file) fclose(file);
  772. static boost::interprocess::file_lock lock(pathLockFile.string().c_str());
  773. if (!lock.try_lock())
  774. return InitError(strprintf(_("Cannot obtain a lock on data directory %s. Bitcoin Core is probably already running."), strDataDir));
  775. #ifndef WIN32
  776. CreatePidFile(GetPidFile(), getpid());
  777. #endif
  778. if (GetBoolArg("-shrinkdebugfile", !fDebug))
  779. ShrinkDebugFile();
  780. LogPrintf("\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n");
  781. LogPrintf("Bitcoin version %s (%s)\n", FormatFullVersion(), CLIENT_DATE);
  782. LogPrintf("Using OpenSSL version %s\n", SSLeay_version(SSLEAY_VERSION));
  783. #ifdef ENABLE_WALLET
  784. LogPrintf("Using BerkeleyDB version %s\n", DbEnv::version(0, 0, 0));
  785. #endif
  786. if (!fLogTimestamps)
  787. LogPrintf("Startup time: %s\n", DateTimeStrFormat("%Y-%m-%d %H:%M:%S", GetTime()));
  788. LogPrintf("Default data directory %s\n", GetDefaultDataDir().string());
  789. LogPrintf("Using data directory %s\n", strDataDir);
  790. LogPrintf("Using config file %s\n", GetConfigFile().string());
  791. LogPrintf("Using at most %i connections (%i file descriptors available)\n", nMaxConnections, nFD);
  792. std::ostringstream strErrors;
  793. LogPrintf("Using %u threads for script verification\n", nScriptCheckThreads);
  794. if (nScriptCheckThreads) {
  795. for (int i=0; i<nScriptCheckThreads-1; i++)
  796. threadGroup.create_thread(&ThreadScriptCheck);
  797. }
  798. /* Start the RPC server already. It will be started in "warmup" mode
  799. * and not really process calls already (but it will signify connections
  800. * that the server is there and will be ready later). Warmup mode will
  801. * be disabled when initialisation is finished.
  802. */
  803. if (fServer)
  804. {
  805. uiInterface.InitMessage.connect(SetRPCWarmupStatus);
  806. RPCServer::OnStopped(&OnRPCStopped);
  807. RPCServer::OnPreCommand(&OnRPCPreCommand);
  808. StartRPCThreads();
  809. }
  810. int64_t nStart;
  811. // ********************************************************* Step 5: verify wallet database integrity
  812. #ifdef ENABLE_WALLET
  813. if (!fDisableWallet) {
  814. LogPrintf("Using wallet %s\n", strWalletFile);
  815. uiInterface.InitMessage(_("Verifying wallet..."));
  816. std::string warningString;
  817. std::string errorString;
  818. if (!CWallet::Verify(strWalletFile, warningString, errorString))
  819. return false;
  820. if (!warningString.empty())
  821. InitWarning(warningString);
  822. if (!errorString.empty())
  823. return InitError(warningString);
  824. } // (!fDisableWallet)
  825. #endif // ENABLE_WALLET
  826. // ********************************************************* Step 6: network initialization
  827. RegisterNodeSignals(GetNodeSignals());
  828. if (mapArgs.count("-onlynet")) {
  829. std::set<enum Network> nets;
  830. BOOST_FOREACH(std::string snet, mapMultiArgs["-onlynet"]) {
  831. enum Network net = ParseNetwork(snet);
  832. if (net == NET_UNROUTABLE)
  833. return InitError(strprintf(_("Unknown network specified in -onlynet: '%s'"), snet));
  834. nets.insert(net);
  835. }
  836. for (int n = 0; n < NET_MAX; n++) {
  837. enum Network net = (enum Network)n;
  838. if (!nets.count(net))
  839. SetLimited(net);
  840. }
  841. }
  842. if (mapArgs.count("-whitelist")) {
  843. BOOST_FOREACH(const std::string& net, mapMultiArgs["-whitelist"]) {
  844. CSubNet subnet(net);
  845. if (!subnet.IsValid())
  846. return InitError(strprintf(_("Invalid netmask specified in -whitelist: '%s'"), net));
  847. CNode::AddWhitelistedRange(subnet);
  848. }
  849. }
  850. proxyType addrProxy;
  851. bool fProxy = false;
  852. if (mapArgs.count("-proxy")) {
  853. addrProxy = proxyType(CService(mapArgs["-proxy"], 9050), GetArg("-proxyrandomize", true));
  854. if (!addrProxy.IsValid())
  855. return InitError(strprintf(_("Invalid -proxy address: '%s'"), mapArgs["-proxy"]));
  856. SetProxy(NET_IPV4, addrProxy);
  857. SetProxy(NET_IPV6, addrProxy);
  858. SetNameProxy(addrProxy);
  859. fProxy = true;
  860. }
  861. // -onion can override normal proxy, -noonion disables connecting to .onion entirely
  862. if (!(mapArgs.count("-onion") && mapArgs["-onion"] == "0") &&
  863. (fProxy || mapArgs.count("-onion"))) {
  864. proxyType addrOnion;
  865. if (!mapArgs.count("-onion"))
  866. addrOnion = addrProxy;
  867. else
  868. addrOnion = proxyType(CService(mapArgs["-onion"], 9050), GetArg("-proxyrandomize", true));
  869. if (!addrOnion.IsValid())
  870. return InitError(strprintf(_("Invalid -onion address: '%s'"), mapArgs["-onion"]));
  871. SetProxy(NET_TOR, addrOnion);
  872. SetReachable(NET_TOR);
  873. }
  874. // see Step 2: parameter interactions for more information about these
  875. fListen = GetBoolArg("-listen", DEFAULT_LISTEN);
  876. fDiscover = GetBoolArg("-discover", true);
  877. fNameLookup = GetBoolArg("-dns", true);
  878. bool fBound = false;
  879. if (fListen) {
  880. if (mapArgs.count("-bind") || mapArgs.count("-whitebind")) {
  881. BOOST_FOREACH(std::string strBind, mapMultiArgs["-bind"]) {
  882. CService addrBind;
  883. if (!Lookup(strBind.c_str(), addrBind, GetListenPort(), false))
  884. return InitError(strprintf(_("Cannot resolve -bind address: '%s'"), strBind));
  885. fBound |= Bind(addrBind, (BF_EXPLICIT | BF_REPORT_ERROR));
  886. }
  887. BOOST_FOREACH(std::string strBind, mapMultiArgs["-whitebind"]) {
  888. CService addrBind;
  889. if (!Lookup(strBind.c_str(), addrBind, 0, false))
  890. return InitError(strprintf(_("Cannot resolve -whitebind address: '%s'"), strBind));
  891. if (addrBind.GetPort() == 0)
  892. return InitError(strprintf(_("Need to specify a port with -whitebind: '%s'"), strBind));
  893. fBound |= Bind(addrBind, (BF_EXPLICIT | BF_REPORT_ERROR | BF_WHITELIST));
  894. }
  895. }
  896. else {
  897. struct in_addr inaddr_any;
  898. inaddr_any.s_addr = INADDR_ANY;
  899. fBound |= Bind(CService(in6addr_any, GetListenPort()), BF_NONE);
  900. fBound |= Bind(CService(inaddr_any, GetListenPort()), !fBound ? BF_REPORT_ERROR : BF_NONE);
  901. }
  902. if (!fBound)
  903. return InitError(_("Failed to listen on any port. Use -listen=0 if you want this."));
  904. }
  905. if (mapArgs.count("-externalip")) {
  906. BOOST_FOREACH(string strAddr, mapMultiArgs["-externalip"]) {
  907. CService addrLocal(strAddr, GetListenPort(), fNameLookup);
  908. if (!addrLocal.IsValid())
  909. return InitError(strprintf(_("Cannot resolve -externalip address: '%s'"), strAddr));
  910. AddLocal(CService(strAddr, GetListenPort(), fNameLookup), LOCAL_MANUAL);
  911. }
  912. }
  913. BOOST_FOREACH(string strDest, mapMultiArgs["-seednode"])
  914. AddOneShot(strDest);
  915. // ********************************************************* Step 7: load block chain
  916. fReindex = GetBoolArg("-reindex", false);
  917. // Upgrading to 0.8; hard-link the old blknnnn.dat files into /blocks/
  918. boost::filesystem::path blocksDir = GetDataDir() / "blocks";
  919. if (!boost::filesystem::exists(blocksDir))
  920. {
  921. boost::filesystem::create_directories(blocksDir);
  922. bool linked = false;
  923. for (unsigned int i = 1; i < 10000; i++) {
  924. boost::filesystem::path source = GetDataDir() / strprintf("blk%04u.dat", i);
  925. if (!boost::filesystem::exists(source)) break;
  926. boost::filesystem::path dest = blocksDir / strprintf("blk%05u.dat", i-1);
  927. try {
  928. boost::filesystem::create_hard_link(source, dest);
  929. LogPrintf("Hardlinked %s -> %s\n", source.string(), dest.string());
  930. linked = true;
  931. } catch (const boost::filesystem::filesystem_error& e) {
  932. // Note: hardlink creation failing is not a disaster, it just means
  933. // blocks will get re-downloaded from peers.
  934. LogPrintf("Error hardlinking blk%04u.dat: %s\n", i, e.what());
  935. break;
  936. }
  937. }
  938. if (linked)
  939. {
  940. fReindex = true;
  941. }
  942. }
  943. // cache size calculations
  944. size_t nTotalCache = (GetArg("-dbcache", nDefaultDbCache) << 20);
  945. if (nTotalCache < (nMinDbCache << 20))
  946. nTotalCache = (nMinDbCache << 20); // total cache cannot be less than nMinDbCache
  947. else if (nTotalCache > (nMaxDbCache << 20))
  948. nTotalCache = (nMaxDbCache << 20); // total cache cannot be greater than nMaxDbCache
  949. size_t nBlockTreeDBCache = nTotalCache / 8;
  950. if (nBlockTreeDBCache > (1 << 21) && !GetBoolArg("-txindex", false))
  951. nBlockTreeDBCache = (1 << 21); // block tree db cache shouldn't be larger than 2 MiB
  952. nTotalCache -= nBlockTreeDBCache;
  953. size_t nCoinDBCache = nTotalCache / 2; // use half of the remaining cache for coindb cache
  954. nTotalCache -= nCoinDBCache;
  955. nCoinCacheSize = nTotalCache / 300; // coins in memory require around 300 bytes
  956. bool fLoaded = false;
  957. while (!fLoaded) {
  958. bool fReset = fReindex;
  959. std::string strLoadError;
  960. uiInterface.InitMessage(_("Loading block index..."));
  961. nStart = GetTimeMillis();
  962. do {
  963. try {
  964. UnloadBlockIndex();
  965. delete pcoinsTip;
  966. delete pcoinsdbview;
  967. delete pcoinscatcher;
  968. delete pblocktree;
  969. pblocktree = new CBlockTreeDB(nBlockTreeDBCache, false, fReindex);
  970. pcoinsdbview = new CCoinsViewDB(nCoinDBCache, false, fReindex);
  971. pcoinscatcher = new CCoinsViewErrorCatcher(pcoinsdbview);
  972. pcoinsTip = new CCoinsViewCache(pcoinscatcher);
  973. if (fReindex) {
  974. pblocktree->WriteReindexing(true);
  975. //If we're reindexing in prune mode, wipe away all our block and undo data files
  976. if (fPruneMode)
  977. DeleteAllBlockFiles();
  978. }
  979. if (!LoadBlockIndex()) {
  980. strLoadError = _("Error loading block database");
  981. break;
  982. }
  983. // If the loaded chain has a wrong genesis, bail out immediately
  984. // (we're likely using a testnet datadir, or the other way around).
  985. if (!mapBlockIndex.empty() && mapBlockIndex.count(chainparams.GetConsensus().hashGenesisBlock) == 0)
  986. return InitError(_("Incorrect or no genesis block found. Wrong datadir for network?"));
  987. // Initialize the block index (no-op if non-empty database was already loaded)
  988. if (!InitBlockIndex()) {
  989. strLoadError = _("Error initializing block database");
  990. break;
  991. }
  992. // Check for changed -txindex state
  993. if (fTxIndex != GetBoolArg("-txindex", false)) {
  994. strLoadError = _("You need to rebuild the database using -reindex to change -txindex");
  995. break;
  996. }
  997. // Check for changed -prune state. What we are concerned about is a user who has pruned blocks
  998. // in the past, but is now trying to run unpruned.
  999. if (fHavePruned && !fPruneMode) {
  1000. strLoadError = _("You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain");
  1001. break;
  1002. }
  1003. uiInterface.InitMessage(_("Verifying blocks..."));
  1004. if (fHavePruned && GetArg("-checkblocks", 288) > MIN_BLOCKS_TO_KEEP) {
  1005. LogPrintf("Prune: pruned datadir may not have more than %d blocks; -checkblocks=%d may fail\n",
  1006. MIN_BLOCKS_TO_KEEP, GetArg("-checkblocks", 288));
  1007. }
  1008. if (!CVerifyDB().VerifyDB(pcoinsdbview, GetArg("-checklevel", 3),
  1009. GetArg("-checkblocks", 288))) {
  1010. strLoadError = _("Corrupted block database detected");
  1011. break;
  1012. }
  1013. } catch (const std::exception& e) {
  1014. if (fDebug) LogPrintf("%s\n", e.what());
  1015. strLoadError = _("Error opening block database");
  1016. break;
  1017. }
  1018. fLoaded = true;
  1019. } while(false);
  1020. if (!fLoaded) {
  1021. // first suggest a reindex
  1022. if (!fReset) {
  1023. bool fRet = uiInterface.ThreadSafeMessageBox(
  1024. strLoadError + ".\n\n" + _("Do you want to rebuild the block database now?"),
  1025. "", CClientUIInterface::MSG_ERROR | CClientUIInterface::BTN_ABORT);
  1026. if (fRet) {
  1027. fReindex = true;
  1028. fRequestShutdown = false;
  1029. } else {
  1030. LogPrintf("Aborted block database rebuild. Exiting.\n");
  1031. return false;
  1032. }
  1033. } else {
  1034. return InitError(strLoadError);
  1035. }
  1036. }
  1037. }
  1038. // As LoadBlockIndex can take several minutes, it's possible the user
  1039. // requested to kill the GUI during the last operation. If so, exit.
  1040. // As the program has not fully started yet, Shutdown() is possibly overkill.
  1041. if (fRequestShutdown)
  1042. {
  1043. LogPrintf("Shutdown requested. Exiting.\n");
  1044. return false;
  1045. }
  1046. LogPrintf(" block index %15dms\n", GetTimeMillis() - nStart);
  1047. boost::filesystem::path est_path = GetDataDir() / FEE_ESTIMATES_FILENAME;
  1048. CAutoFile est_filein(fopen(est_path.string().c_str(), "rb"), SER_DISK, CLIENT_VERSION);
  1049. // Allowed to fail as this file IS missing on first startup.
  1050. if (!est_filein.IsNull())
  1051. mempool.ReadFeeEstimates(est_filein);
  1052. fFeeEstimatesInitialized = true;
  1053. // if prune mode, unset NODE_NETWORK and prune block files
  1054. if (fPruneMode) {
  1055. LogPrintf("Unsetting NODE_NETWORK on prune mode\n");
  1056. nLocalServices &= ~NODE_NETWORK;
  1057. if (!fReindex) {
  1058. PruneAndFlush();
  1059. }
  1060. }
  1061. // ********************************************************* Step 8: load wallet
  1062. #ifdef ENABLE_WALLET
  1063. if (fDisableWallet) {
  1064. pwalletMain = NULL;
  1065. LogPrintf("Wallet disabled!\n");
  1066. } else {
  1067. // needed to restore wallet transaction meta data after -zapwallettxes
  1068. std::vector<CWalletTx> vWtx;
  1069. if (GetBoolArg("-zapwallettxes", false)) {
  1070. uiInterface.InitMessage(_("Zapping all transactions from wallet..."));
  1071. pwalletMain = new CWallet(strWalletFile);
  1072. DBErrors nZapWalletRet = pwalletMain->ZapWalletTx(vWtx);
  1073. if (nZapWalletRet != DB_LOAD_OK) {
  1074. uiInterface.InitMessage(_("Error loading wallet.dat: Wallet corrupted"));
  1075. return false;
  1076. }
  1077. delete pwalletMain;
  1078. pwalletMain = NULL;
  1079. }
  1080. uiInterface.InitMessage(_("Loading wallet..."));
  1081. nStart = GetTimeMillis();
  1082. bool fFirstRun = true;
  1083. pwalletMain = new CWallet(strWalletFile);
  1084. DBErrors nLoadWalletRet = pwalletMain->LoadWallet(fFirstRun);
  1085. if (nLoadWalletRet != DB_LOAD_OK)
  1086. {
  1087. if (nLoadWalletRet == DB_CORRUPT)
  1088. strErrors << _("Error loading wallet.dat: Wallet corrupted") << "\n";
  1089. else if (nLoadWalletRet == DB_NONCRITICAL_ERROR)
  1090. {
  1091. string msg(_("Warning: error reading wallet.dat! All keys read correctly, but transaction data"
  1092. " or address book entries might be missing or incorrect."));
  1093. InitWarning(msg);
  1094. }
  1095. else if (nLoadWalletRet == DB_TOO_NEW)
  1096. strErrors << _("Error loading wallet.dat: Wallet requires newer version of Bitcoin Core") << "\n";
  1097. else if (nLoadWalletRet == DB_NEED_REWRITE)
  1098. {
  1099. strErrors << _("Wallet needed to be rewritten: restart Bitcoin Core to complete") << "\n";
  1100. LogPrintf("%s", strErrors.str());
  1101. return InitError(strErrors.str());
  1102. }
  1103. else
  1104. strErrors << _("Error loading wallet.dat") << "\n";
  1105. }
  1106. if (GetBoolArg("-upgradewallet", fFirstRun))
  1107. {
  1108. int nMaxVersion = GetArg("-upgradewallet", 0);
  1109. if (nMaxVersion == 0) // the -upgradewallet without argument case
  1110. {
  1111. LogPrintf("Performing wallet upgrade to %i\n", FEATURE_LATEST);
  1112. nMaxVersion = CLIENT_VERSION;
  1113. pwalletMain->SetMinVersion(FEATURE_LATEST); // permanently upgrade the wallet immediately
  1114. }
  1115. else
  1116. LogPrintf("Allowing wallet upgrade up to %i\n", nMaxVersion);
  1117. if (nMaxVersion < pwalletMain->GetVersion())
  1118. strErrors << _("Cannot downgrade wallet") << "\n";
  1119. pwalletMain->SetMaxVersion(nMaxVersion);
  1120. }
  1121. if (fFirstRun)
  1122. {
  1123. // Create new keyUser and set as default key
  1124. RandAddSeedPerfmon();
  1125. CPubKey newDefaultKey;
  1126. if (pwalletMain->GetKeyFromPool(newDefaultKey)) {
  1127. pwalletMain->SetDefaultKey(newDefaultKey);
  1128. if (!pwalletMain->SetAddressBook(pwalletMain->vchDefaultKey.GetID(), "", "receive"))
  1129. strErrors << _("Cannot write default address") << "\n";
  1130. }
  1131. pwalletMain->SetBestChain(chainActive.GetLocator());
  1132. }
  1133. LogPrintf("%s", strErrors.str());
  1134. LogPrintf(" wallet %15dms\n", GetTimeMillis() - nStart);
  1135. RegisterValidationInterface(pwalletMain);
  1136. CBlockIndex *pindexRescan = chainActive.Tip();
  1137. if (GetBoolArg("-rescan", false))
  1138. pindexRescan = chainActive.Genesis();
  1139. else
  1140. {
  1141. CWalletDB walletdb(strWalletFile);
  1142. CBlockLocator locator;
  1143. if (walletdb.ReadBestBlock(locator))
  1144. pindexRescan = FindForkInGlobalIndex(chainActive, locator);
  1145. else
  1146. pindexRescan = chainActive.Genesis();
  1147. }
  1148. if (chainActive.Tip() && chainActive.Tip() != pindexRescan)
  1149. {
  1150. uiInterface.InitMessage(_("Rescanning..."));
  1151. LogPrintf("Rescanning last %i blocks (from block %i)...\n", chainActive.Height() - pindexRescan->nHeight, pindexRescan->nHeight);
  1152. nStart = GetTimeMillis();
  1153. pwalletMain->ScanForWalletTransactions(pindexRescan, true);
  1154. LogPrintf(" rescan %15dms\n", GetTimeMillis() - nStart);
  1155. pwalletMain->SetBestChain(chainActive.GetLocator());
  1156. nWalletDBUpdated++;
  1157. // Restore wallet transaction metadata after -zapwallettxes=1
  1158. if (GetBoolArg("-zapwallettxes", false) && GetArg("-zapwallettxes", "1") != "2")
  1159. {
  1160. CWalletDB walletdb(strWalletFile);
  1161. BOOST_FOREACH(const CWalletTx& wtxOld, vWtx)
  1162. {
  1163. uint256 hash = wtxOld.GetHash();
  1164. std::map<uint256, CWalletTx>::iterator mi = pwalletMain->mapWallet.find(hash);
  1165. if (mi != pwalletMain->mapWallet.end())
  1166. {
  1167. const CWalletTx* copyFrom = &wtxOld;
  1168. CWalletTx* copyTo = &mi->second;
  1169. copyTo->mapValue = copyFrom->mapValue;
  1170. copyTo->vOrderForm = copyFrom->vOrderForm;
  1171. copyTo->nTimeReceived = copyFrom->nTimeReceived;
  1172. copyTo->nTimeSmart = copyFrom->nTimeSmart;
  1173. copyTo->fFromMe = copyFrom->fFromMe;
  1174. copyTo->strFromAccount = copyFrom->strFromAccount;
  1175. copyTo->nOrderPos = copyFrom->nOrderPos;
  1176. copyTo->WriteToDisk(&walletdb);
  1177. }
  1178. }
  1179. }
  1180. }
  1181. pwalletMain->SetBroadcastTransactions(GetBoolArg("-walletbroadcast", true));
  1182. } // (!fDisableWallet)
  1183. #else // ENABLE_WALLET
  1184. LogPrintf("No wallet compiled in!\n");
  1185. #endif // !ENABLE_WALLET
  1186. // ********************************************************* Step 9: import blocks
  1187. if (mapArgs.count("-blocknotify"))
  1188. uiInterface.NotifyBlockTip.connect(BlockNotifyCallback);
  1189. // scan for better chains in the block chain database, that are not yet connected in the active best chain
  1190. CValidationState state;
  1191. if (!ActivateBestChain(state))
  1192. strErrors << "Failed to connect best block";
  1193. std::vector<boost::filesystem::path> vImportFiles;
  1194. if (mapArgs.count("-loadblock"))
  1195. {
  1196. BOOST_FOREACH(string strFile, mapMultiArgs["-loadblock"])
  1197. vImportFiles.push_back(strFile);
  1198. }
  1199. threadGroup.create_thread(boost::bind(&ThreadImport, vImportFiles));
  1200. if (chainActive.Tip() == NULL) {
  1201. LogPrintf("Waiting for genesis block to be imported...\n");
  1202. while (!fRequestShutdown && chainActive.Tip() == NULL)
  1203. MilliSleep(10);
  1204. }
  1205. // ********************************************************* Step 10: start node
  1206. if (!CheckDiskSpace())
  1207. return false;
  1208. if (!strErrors.str().empty())
  1209. return InitError(strErrors.str());
  1210. RandAddSeedPerfmon();
  1211. //// debug print
  1212. LogPrintf("mapBlockIndex.size() = %u\n", mapBlockIndex.size());
  1213. LogPrintf("nBestHeight = %d\n", chainActive.Height());
  1214. #ifdef ENABLE_WALLET
  1215. LogPrintf("setKeyPool.size() = %u\n", pwalletMain ? pwalletMain->setKeyPool.size() : 0);
  1216. LogPrintf("mapWallet.size() = %u\n", pwalletMain ? pwalletMain->mapWallet.size() : 0);
  1217. LogPrintf("mapAddressBook.size() = %u\n", pwalletMain ? pwalletMain->mapAddressBook.size() : 0);
  1218. #endif
  1219. StartNode(threadGroup);
  1220. #ifdef ENABLE_WALLET
  1221. // Generate coins in the background
  1222. if (pwalletMain)
  1223. GenerateBitcoins(GetBoolArg("-gen", false), pwalletMain, GetArg("-genproclimit", 1));
  1224. #endif
  1225. // ********************************************************* Step 11: finished
  1226. SetRPCWarmupFinished();
  1227. uiInterface.InitMessage(_("Done loading"));
  1228. #ifdef ENABLE_WALLET
  1229. if (pwalletMain) {
  1230. // Add wallet transactions that aren't already in a block to mapTransactions
  1231. pwalletMain->ReacceptWalletTransactions();
  1232. // Run a thread to flush wallet periodically
  1233. threadGroup.create_thread(boost::bind(&ThreadFlushWalletDB, boost::ref(pwalletMain->strWalletFile)));
  1234. }
  1235. #endif
  1236. return !fRequestShutdown;
  1237. }