You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

starwels-qt.1 14KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561
  1. .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.3.
  2. .TH STARWELS-QT "1" "September 2017" "starwels-qt v0.15.0.1" "User Commands"
  3. .SH NAME
  4. starwels-qt \- manual page for starwels-qt v0.15.0.1
  5. .SH DESCRIPTION
  6. Starwels version v0.15.0.1\-dirty (64\-bit)
  7. Usage:
  8. .IP
  9. starwels\-qt [command\-line options]
  10. .SH OPTIONS
  11. .HP
  12. \-?
  13. .IP
  14. Print this help message and exit
  15. .HP
  16. \fB\-version\fR
  17. .IP
  18. Print version and exit
  19. .HP
  20. \fB\-alertnotify=\fR<cmd>
  21. .IP
  22. Execute command when a relevant alert is received or we see a really
  23. long fork (%s in cmd is replaced by message)
  24. .HP
  25. \fB\-blocknotify=\fR<cmd>
  26. .IP
  27. Execute command when the best block changes (%s in cmd is replaced by
  28. block hash)
  29. .HP
  30. \fB\-assumevalid=\fR<hex>
  31. .IP
  32. If this block is in the chain assume that it and its ancestors are valid
  33. and potentially skip their script verification (0 to verify all,
  34. default:
  35. 00000000764077b29d13e1cb2484f028a24ef2a44486b6e5d3cb17eb4716c465,
  36. ai:
  37. 00000000d7674ad1e7703e7ba02b7611c12fe74de27b6a414cf6e906cc3599e9)
  38. .HP
  39. \fB\-conf=\fR<file>
  40. .IP
  41. Specify configuration file (default: starwels.conf)
  42. .HP
  43. \fB\-datadir=\fR<dir>
  44. .IP
  45. Specify data directory
  46. .HP
  47. \fB\-dbcache=\fR<n>
  48. .IP
  49. Set database cache size in megabytes (4 to 16384, default: 450)
  50. .HP
  51. \fB\-loadblock=\fR<file>
  52. .IP
  53. Imports blocks from external blk000??.dat file on startup
  54. .HP
  55. \fB\-maxorphantx=\fR<n>
  56. .IP
  57. Keep at most <n> unconnectable transactions in memory (default: 100)
  58. .HP
  59. \fB\-maxmempool=\fR<n>
  60. .IP
  61. Keep the transaction memory pool below <n> megabytes (default: 300)
  62. .HP
  63. \fB\-mempoolexpiry=\fR<n>
  64. .IP
  65. Do not keep transactions in the mempool longer than <n> hours (default:
  66. 336)
  67. .HP
  68. \fB\-persistmempool\fR
  69. .IP
  70. Whether to save the mempool on shutdown and load on restart (default: 1)
  71. .HP
  72. \fB\-blockreconstructionextratxn=\fR<n>
  73. .IP
  74. Extra transactions to keep in memory for compact block reconstructions
  75. (default: 100)
  76. .HP
  77. \fB\-par=\fR<n>
  78. .IP
  79. Set the number of script verification threads (\fB\-6\fR to 16, 0 = auto, <0 =
  80. leave that many cores free, default: 0)
  81. .HP
  82. \fB\-pid=\fR<file>
  83. .IP
  84. Specify pid file (default: starwelsd.pid)
  85. .HP
  86. \fB\-prune=\fR<n>
  87. .IP
  88. Reduce storage requirements by enabling pruning (deleting) of old
  89. blocks. This allows the pruneblockchain RPC to be called to
  90. delete specific blocks, and enables automatic pruning of old
  91. blocks if a target size in MiB is provided. This mode is
  92. incompatible with \fB\-txindex\fR and \fB\-rescan\fR. Warning: Reverting this
  93. setting requires re\-downloading the entire blockchain. (default:
  94. 0 = disable pruning blocks, 1 = allow manual pruning via RPC,
  95. >550 = automatically prune block files to stay under the
  96. specified target size in MiB)
  97. .HP
  98. \fB\-reindex\-chainstate\fR
  99. .IP
  100. Rebuild chain state from the currently indexed blocks
  101. .HP
  102. \fB\-reindex\fR
  103. .IP
  104. Rebuild chain state and block index from the blk*.dat files on disk
  105. .HP
  106. \fB\-sysperms\fR
  107. .IP
  108. Create new files with system default permissions, instead of umask 077
  109. (only effective with disabled wallet functionality)
  110. .HP
  111. \fB\-txindex\fR
  112. .IP
  113. Maintain a full transaction index, used by the getrawtransaction rpc
  114. call (default: 0)
  115. .PP
  116. Connection options:
  117. .HP
  118. \fB\-addnode=\fR<ip>
  119. .IP
  120. Add a node to connect to and attempt to keep the connection open
  121. .HP
  122. \fB\-banscore=\fR<n>
  123. .IP
  124. Threshold for disconnecting misbehaving peers (default: 100)
  125. .HP
  126. \fB\-bantime=\fR<n>
  127. .IP
  128. Number of seconds to keep misbehaving peers from reconnecting (default:
  129. 86400)
  130. .HP
  131. \fB\-bind=\fR<addr>
  132. .IP
  133. Bind to given address and always listen on it. Use [host]:port notation
  134. for IPv6
  135. .HP
  136. \fB\-connect=\fR<ip>
  137. .IP
  138. Connect only to the specified node(s); \fB\-connect\fR=\fI\,0\/\fR disables automatic
  139. connections
  140. .HP
  141. \fB\-discover\fR
  142. .IP
  143. Discover own IP addresses (default: 1 when listening and no \fB\-externalip\fR
  144. or \fB\-proxy\fR)
  145. .HP
  146. \fB\-dns\fR
  147. .IP
  148. Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (default: 1)
  149. .HP
  150. \fB\-dnsseed\fR
  151. .IP
  152. Query for peer addresses via DNS lookup, if low on addresses (default: 1
  153. unless \fB\-connect\fR used)
  154. .HP
  155. \fB\-externalip=\fR<ip>
  156. .IP
  157. Specify your own public address
  158. .HP
  159. \fB\-forcednsseed\fR
  160. .IP
  161. Always query for peer addresses via DNS lookup (default: 0)
  162. .HP
  163. \fB\-listen\fR
  164. .IP
  165. Accept connections from outside (default: 1 if no \fB\-proxy\fR or \fB\-connect\fR)
  166. .HP
  167. \fB\-listenonion\fR
  168. .IP
  169. Automatically create Tor hidden service (default: 1)
  170. .HP
  171. \fB\-maxconnections=\fR<n>
  172. .IP
  173. Maintain at most <n> connections to peers (default: 125)
  174. .HP
  175. \fB\-maxreceivebuffer=\fR<n>
  176. .IP
  177. Maximum per\-connection receive buffer, <n>*1000 bytes (default: 5000)
  178. .HP
  179. \fB\-maxsendbuffer=\fR<n>
  180. .IP
  181. Maximum per\-connection send buffer, <n>*1000 bytes (default: 1000)
  182. .HP
  183. \fB\-maxtimeadjustment\fR
  184. .IP
  185. Maximum allowed median peer time offset adjustment. Local perspective of
  186. time may be influenced by peers forward or backward by this
  187. amount. (default: 4200 seconds)
  188. .HP
  189. \fB\-onion=\fR<ip:port>
  190. .IP
  191. Use separate SOCKS5 proxy to reach peers via Tor hidden services
  192. (default: \fB\-proxy\fR)
  193. .HP
  194. \fB\-onlynet=\fR<net>
  195. .IP
  196. Only connect to nodes in network <net> (ipv4, ipv6 or onion)
  197. .HP
  198. \fB\-permitbaremultisig\fR
  199. .IP
  200. Relay non\-P2SH multisig (default: 1)
  201. .HP
  202. \fB\-peerbloomfilters\fR
  203. .IP
  204. Support filtering of blocks and transaction with bloom filters (default:
  205. 1)
  206. .HP
  207. \fB\-port=\fR<port>
  208. .IP
  209. Listen for connections on <port> (default: 8343 or ai: 8333)
  210. .HP
  211. \fB\-proxy=\fR<ip:port>
  212. .IP
  213. Connect through SOCKS5 proxy
  214. .HP
  215. \fB\-proxyrandomize\fR
  216. .IP
  217. Randomize credentials for every proxy connection. This enables Tor
  218. stream isolation (default: 1)
  219. .HP
  220. \fB\-seednode=\fR<ip>
  221. .IP
  222. Connect to a node to retrieve peer addresses, and disconnect
  223. .HP
  224. \fB\-timeout=\fR<n>
  225. .IP
  226. Specify connection timeout in milliseconds (minimum: 1, default: 5000)
  227. .HP
  228. \fB\-torcontrol=\fR<ip>:<port>
  229. .IP
  230. Tor control port to use if onion listening enabled (default:
  231. 127.0.0.1:9051)
  232. .HP
  233. \fB\-torpassword=\fR<pass>
  234. .IP
  235. Tor control port password (default: empty)
  236. .HP
  237. \fB\-upnp\fR
  238. .IP
  239. Use UPnP to map the listening port (default: 0)
  240. .HP
  241. \fB\-whitebind=\fR<addr>
  242. .IP
  243. Bind to given address and whitelist peers connecting to it. Use
  244. [host]:port notation for IPv6
  245. .HP
  246. \fB\-whitelist=\fR<IP address or network>
  247. .IP
  248. Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or
  249. CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple
  250. times. Whitelisted peers cannot be DoS banned and their
  251. transactions are always relayed, even if they are already in the
  252. mempool, useful e.g. for a gateway
  253. .HP
  254. \fB\-maxuploadtarget=\fR<n>
  255. .IP
  256. Tries to keep outbound traffic under the given target (in MiB per 24h),
  257. 0 = no limit (default: 0)
  258. .PP
  259. Wallet options:
  260. .HP
  261. \fB\-disablewallet\fR
  262. .IP
  263. Do not load the wallet and disable wallet RPC calls
  264. .HP
  265. \fB\-keypool=\fR<n>
  266. .IP
  267. Set key pool size to <n> (default: 1000)
  268. .HP
  269. \fB\-fallbackfee=\fR<amt>
  270. .IP
  271. A fee rate (in MAI/kB) that will be used when fee estimation has
  272. insufficient data (default: 0.0002)
  273. .HP
  274. \fB\-discardfee=\fR<amt>
  275. .IP
  276. The fee rate (in MAI/kB) that indicates your tolerance for discarding
  277. change by adding it to the fee (default: 0.0001). Note: An output
  278. is discarded if it is dust at this rate, but we will always
  279. discard up to the dust relay fee and a discard fee above that is
  280. limited by the fee estimate for the longest target
  281. .HP
  282. \fB\-mintxfee=\fR<amt>
  283. .IP
  284. Fees (in MAI/kB) smaller than this are considered zero fee for
  285. transaction creation (default: 0.00001)
  286. .HP
  287. \fB\-paytxfee=\fR<amt>
  288. .IP
  289. Fee (in MAI/kB) to add to transactions you send (default: 0.00)
  290. .HP
  291. \fB\-rescan\fR
  292. .IP
  293. Rescan the block chain for missing wallet transactions on startup
  294. .HP
  295. \fB\-salvagewallet\fR
  296. .IP
  297. Attempt to recover private keys from a corrupt wallet on startup
  298. .HP
  299. \fB\-spendzeroconfchange\fR
  300. .IP
  301. Spend unconfirmed change when sending transactions (default: 1)
  302. .HP
  303. \fB\-txconfirmtarget=\fR<n>
  304. .IP
  305. If paytxfee is not set, include enough fee so transactions begin
  306. confirmation on average within n blocks (default: 6)
  307. .HP
  308. \fB\-usehd\fR
  309. .IP
  310. Use hierarchical deterministic key generation (HD) after BIP32. Only has
  311. effect during wallet creation/first start (default: 1)
  312. .HP
  313. \fB\-walletrbf\fR
  314. .IP
  315. Send transactions with full\-RBF opt\-in enabled (default: 0)
  316. .HP
  317. \fB\-upgradewallet\fR
  318. .IP
  319. Upgrade wallet to latest format on startup
  320. .HP
  321. \fB\-wallet=\fR<file>
  322. .IP
  323. Specify wallet file (within data directory) (default: wallet.dat)
  324. .HP
  325. \fB\-walletbroadcast\fR
  326. .IP
  327. Make the wallet broadcast transactions (default: 1)
  328. .HP
  329. \fB\-walletnotify=\fR<cmd>
  330. .IP
  331. Execute command when a wallet transaction changes (%s in cmd is replaced
  332. by TxID)
  333. .HP
  334. \fB\-zapwallettxes=\fR<mode>
  335. .IP
  336. Delete all wallet transactions and only recover those parts of the
  337. blockchain through \fB\-rescan\fR on startup (1 = keep tx meta data e.g.
  338. account owner and payment request information, 2 = drop tx meta
  339. data)
  340. .PP
  341. ZeroMQ notification options:
  342. .HP
  343. \fB\-zmqpubhashblock=\fR<address>
  344. .IP
  345. Enable publish hash block in <address>
  346. .HP
  347. \fB\-zmqpubhashtx=\fR<address>
  348. .IP
  349. Enable publish hash transaction in <address>
  350. .HP
  351. \fB\-zmqpubrawblock=\fR<address>
  352. .IP
  353. Enable publish raw block in <address>
  354. .HP
  355. \fB\-zmqpubrawtx=\fR<address>
  356. .IP
  357. Enable publish raw transaction in <address>
  358. .PP
  359. Debugging/Testing options:
  360. .HP
  361. \fB\-uacomment=\fR<cmt>
  362. .IP
  363. Append comment to the user agent string
  364. .HP
  365. \fB\-debug=\fR<category>
  366. .IP
  367. Output debugging information (default: 0, supplying <category> is
  368. optional). If <category> is not supplied or if <category> = 1,
  369. output all debugging information. <category> can be: net, tor,
  370. mempool, http, bench, zmq, db, rpc, estimatefee, addrman,
  371. selectcoins, reindex, cmpctblock, rand, prune, proxy, mempoolrej,
  372. libevent, coindb, qt, leveldb.
  373. .HP
  374. \fB\-debugexclude=\fR<category>
  375. .IP
  376. Exclude debugging information for a category. Can be used in conjunction
  377. with \fB\-debug\fR=\fI\,1\/\fR to output debug logs for all categories except one
  378. or more specified categories.
  379. .HP
  380. \fB\-help\-debug\fR
  381. .IP
  382. Show all debugging options (usage: \fB\-\-help\fR \fB\-help\-debug\fR)
  383. .HP
  384. \fB\-logips\fR
  385. .IP
  386. Include IP addresses in debug output (default: 0)
  387. .HP
  388. \fB\-logtimestamps\fR
  389. .IP
  390. Prepend debug output with timestamp (default: 1)
  391. .HP
  392. \fB\-maxtxfee=\fR<amt>
  393. .IP
  394. Maximum total fees (in MAI) to use in a single wallet transaction or raw
  395. transaction; setting this too low may abort large transactions
  396. (default: 0.10)
  397. .HP
  398. \fB\-printtoconsole\fR
  399. .IP
  400. Send trace/debug info to console instead of debug.log file
  401. .HP
  402. \fB\-shrinkdebugfile\fR
  403. .IP
  404. Shrink debug.log file on client startup (default: 1 when no \fB\-debug\fR)
  405. .PP
  406. Chain selection options:
  407. .HP
  408. \fB\-ai\fR
  409. .IP
  410. Use the test chain
  411. .PP
  412. Node relay options:
  413. .HP
  414. \fB\-bytespersigop\fR
  415. .IP
  416. Equivalent bytes per sigop in transactions for relay and mining
  417. (default: 20)
  418. .HP
  419. \fB\-datacarrier\fR
  420. .IP
  421. Relay and mine data carrier transactions (default: 1)
  422. .HP
  423. \fB\-datacarriersize\fR
  424. .IP
  425. Maximum size of data in data carrier transactions we relay and mine
  426. (default: 83)
  427. .HP
  428. \fB\-mempoolreplacement\fR
  429. .IP
  430. Enable transaction replacement in the memory pool (default: 1)
  431. .HP
  432. \fB\-minrelaytxfee=\fR<amt>
  433. .IP
  434. Fees (in MAI/kB) smaller than this are considered zero fee for relaying,
  435. mining and transaction creation (default: 0.00001)
  436. .HP
  437. \fB\-whitelistrelay\fR
  438. .IP
  439. Accept relayed transactions received from whitelisted peers even when
  440. not relaying transactions (default: 1)
  441. .HP
  442. \fB\-whitelistforcerelay\fR
  443. .IP
  444. Force relay of transactions from whitelisted peers even if they violate
  445. local relay policy (default: 1)
  446. .PP
  447. Block creation options:
  448. .HP
  449. \fB\-blockmaxweight=\fR<n>
  450. .IP
  451. Set maximum BIP141 block weight (default: 3000000)
  452. .HP
  453. \fB\-blockmaxsize=\fR<n>
  454. .IP
  455. Set maximum block size in bytes (default: 750000)
  456. .HP
  457. \fB\-blockmintxfee=\fR<amt>
  458. .IP
  459. Set lowest fee rate (in MAI/kB) for transactions to be included in block
  460. creation. (default: 0.00001)
  461. .PP
  462. RPC server options:
  463. .HP
  464. \fB\-server\fR
  465. .IP
  466. Accept command line and JSON\-RPC commands
  467. .HP
  468. \fB\-rest\fR
  469. .IP
  470. Accept public REST requests (default: 0)
  471. .HP
  472. \fB\-rpcbind=\fR<addr>[:port]
  473. .IP
  474. Bind to given address to listen for JSON\-RPC connections. This option is
  475. ignored unless \fB\-rpcallowip\fR is also passed. Port is optional and
  476. overrides \fB\-rpcport\fR. Use [host]:port notation for IPv6. This
  477. option can be specified multiple times (default: 127.0.0.1 and
  478. ::1 i.e., localhost, or if \fB\-rpcallowip\fR has been specified,
  479. 0.0.0.0 and :: i.e., all addresses)
  480. .HP
  481. \fB\-rpccookiefile=\fR<loc>
  482. .IP
  483. Location of the auth cookie (default: data dir)
  484. .HP
  485. \fB\-rpcuser=\fR<user>
  486. .IP
  487. Username for JSON\-RPC connections
  488. .HP
  489. \fB\-rpcpassword=\fR<pw>
  490. .IP
  491. Password for JSON\-RPC connections
  492. .HP
  493. \fB\-rpcauth=\fR<userpw>
  494. .IP
  495. Username and hashed password for JSON\-RPC connections. The field
  496. <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A
  497. canonical python script is included in share/rpcuser. The client
  498. then connects normally using the
  499. rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This
  500. option can be specified multiple times
  501. .HP
  502. \fB\-rpcport=\fR<port>
  503. .IP
  504. Listen for JSON\-RPC connections on <port> (default: 8342 or ai:
  505. 8332)
  506. .HP
  507. \fB\-rpcallowip=\fR<ip>
  508. .IP
  509. Allow JSON\-RPC connections from specified source. Valid for <ip> are a
  510. single IP (e.g. 1.2.3.4), a network/netmask (e.g.
  511. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This
  512. option can be specified multiple times
  513. .HP
  514. \fB\-rpcserialversion\fR
  515. .IP
  516. Sets the serialization of raw transaction or block hex returned in
  517. non\-verbose mode, non\-segwit(0) or segwit(1) (default: 1)
  518. .HP
  519. \fB\-rpcthreads=\fR<n>
  520. .IP
  521. Set the number of threads to service RPC calls (default: 4)
  522. .PP
  523. UI Options:
  524. .HP
  525. \fB\-choosedatadir\fR
  526. .IP
  527. Choose data directory on startup (default: 0)
  528. .HP
  529. \fB\-lang=\fR<lang>
  530. .IP
  531. Set language, for example "de_DE" (default: system locale)
  532. .HP
  533. \fB\-min\fR
  534. .IP
  535. Start minimized
  536. .HP
  537. \fB\-rootcertificates=\fR<file>
  538. .IP
  539. Set SSL root certificates for payment request (default: \fB\-system\-\fR)
  540. .HP
  541. \fB\-splash\fR
  542. .IP
  543. Show splash screen on startup (default: 1)
  544. .HP
  545. \fB\-resetguisettings\fR
  546. .IP
  547. Reset all settings changed in the GUI
  548. .SH COPYRIGHT
  549. Copyright (C) 2009-2017 The Starwels developers
  550. Please contribute if you find Starwels useful. Visit
  551. <https://github.com/starwels> for further information about the software.
  552. The source code is available from <https://github.com/starwels/starwels>.
  553. This is experimental software.
  554. Distributed under the MIT software license, see the accompanying file COPYING
  555. or <https://opensource.org/licenses/MIT>
  556. This product includes software developed by the OpenSSL Project for use in the
  557. OpenSSL Toolkit <https://www.openssl.org> and cryptographic software written by
  558. Eric Young and UPnP software written by Thomas Bernard.